A-Z index

Rhealis™ DF-P is a foam control additive highly recommended for use in combination with Ethacryl™ products and all types of Superplasticizers in concrete admixtures and in gypsum wallboard manufacturing. It is a liquid type defoaming agent, efficient at low dosage and easily dispersible.

Rheology and Specialty Additives proposes a toolbox of dedicated additives focused on the needs of the construction industry. Rhealis™ 100 is dedicated to vibrocompacting concrete whereas Rhealis™ DFOAM is the perfect defoamer for your Ethacryl™. Rhealis™ 2449 ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

Rhealis™ 100 is an additive for vibrocompacting concrete specially adapted to the pavements and other block manufacturing. It increases the water content with same behavior during the block manufacturing, allows the reduction of the cement content, the increase of the block’s strength and provides better surface quality of the final product. It provides excellent workability. Liquid, easy to formulate.

The dispersions of fillers or extenders, particularly iron oxide, very fine calcium carbonates and clays in water based systems must be achieved easily with common stirrers without forming agglomerates or causing a viscosity build up. Usual inorganic dispersants such as phosphate based dispersants are not able to solve this problem satisfactorily: their deflocculating effectiveness is limited by the fineness of the extenders used and their poor temperature stability (degradation through hydrolysis) affects the long term stability. Rhealis™ 2449 has been especially developed to overcome these problems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

Defoamer

Rhealis™ DFOAM is a foam control additive highly recommended for use in combination with Ethacryl™ products in concrete admixtures and in gypsum wallboard manufacturing. It is a liquid type defoaming agent, efficient at low dosage and easily dispersible.

Rhealis™ SC is is an anionic liquid dispersant especially used for TBM tunneling, which can produce a soft mud to allow the mutual sliding of the clumps, thus minimizing the risk of re-aggregation. 

Rheocarb™ is a complete range for reformulation while keeping paper or board properties. They provide an improvement of runnability, higher solids content coating, good water retention and low elasticity at medium levels of Brookfield viscosity. Used for quality coated papers and boards quality. They can comply with food contact regulations.

Rheocarb™ 101 maintains particles (pigments and latex) state of dispersion with full gloss potential. It provides a good water retention even at low viscosity level and is a strong OBA carrier. It allows the reduction of drying and calendering costs and of coating colors costs (use of cost efficient pigments, binders and other additives). Use in top coats with medium to high solids content and film press coating in place of starch and in order to reduce elasticity and the risks of misting.

Rheocarb™ 121 maintains particles (pigments and latex) dispersion with full gloss potential and strong thickening power. It provides a good water retention and is a strong OBA carrier. It allows the reduction of drying and calendering costs and of coating colors costs (use of cost efficient pigments, binders and other additives). Use in top coats made of slightly coarser pigments and lower solids content and film press coating in place of starch and in order to reduce elasticity and the risks of misting.

Rheocarb™ J 40 is a non-ionic, highly specialized rheology modifier for InkJet Coating Colors. It is specifically designed to improve water retention while maintaining an optimized state of dispersion. Rheocarb™ J 40 can be utilized to ease the mix of InkJet Coating Colors, thus shortening the transition between paper types and reducing circuit washing times & wastewater generation - leading to significant cost savings. Rheocarb™ J 40 benefits: -achieve significant cost savings during the manufacturing transition of different paper types - improved water retention -improved coating runnability at maximum solids -enhanced paper printability

Rheocoat™ is a range of alkali swellable emulsions (ASE and HASE) focused on water retention improvement and coating colors solids stabilization. They work on blade load control and coating defects treatment: bleeding, misting, orange peel, jet instability. They can comply with paper and board foot contact regulations.

Rheocoat™ 66 SN C helps keepy your process under control. Rheocoat™ 66 SN C is a synthetic rheology modifier allowing a better control of the coating process and an improved paper quality. Rheocoat™ 66 SN C is a ready to use acidic modifier. Rheocoat™ 66 SN C features outstanding water retention efficiency and conferes a balanced rheology profile to your coating color.

Rheocoat™ 66 SN C helps keepy your process under control. Rheocoat™ 66 SN C is a synthetic rheology modifier allowing a better control of the coating process and an improved paper quality. Rheocoat™ 66 SN C is a ready to use acidic modifier. Rheocoat™ 66 SN C features outstanding water retention efficiency and conferes a balanced rheology profile to your coating color.

Rheocoat™ 1010 is a synthetic rheology modifier allowing a better control of the coating process and helping to get improved papyer and board qualities. Rheocoat™ 1010 is a pure-neutralized emulsion, ready to use and easy to mix into the coating colors.

Rheocoat™ 2121 is an anionic polymer allowing a better control of the curtain coating rheology.

RHEOCOAT™ 2121 C is an anionic polymer allowing a better control of the curtain coating rheology.

Rheocoat™ 2424 is an anionic polymer allowing a better control of the curtain coating rheology.

Rheocoat™ 27 helps to keep your process under control. Rheocoat™ 27 is a synthetic rheology modifier allowing a better control of the coating process and an improved paper and board qualities. Rheocoat™ 27 is a pre-neutralized emulsion, ready to use and easy to mix into the coating colors. Rheocoat™ 27 provides an outstanding water retention with a moderate thickening effect.

Rheocoat™ 27 C helps to keep your process under control.Rheocoat™ 27 C is a synthetic rheology modifier allowing a better control of the coating process and an improved paper and board qualities. Rheocoat™ 27 C is a pre-neutralized emulsion, ready to use and easy to mix into the coating colors. Rheocoat™ 27 C provides an outstanding water retention with a moderate thickening effect.

Rheocoat™ 35 is a synthetic rheology modifier allowing a better control of the coating process and an improved paper quality. Rheocoat™ 35 is a ready to use acidic emulsion of acrylic copolymer. Its composition and structure are designed to set the viscosities at low and high shear rates that conduct the coating colors behavior and blade loading during coating operations. A fine tune of water rentention helps preventing from bleeding or misting while improving solids stability and coating holdout.

Rheocoat™ 35 BR is a synthetic rheology modifier allowing a better control of the coating process and an improved paper quality. Rheocoat™ 35 BR is a ready to use acidic emulsion of acrylic copolymer. Its composition and structure are designed to set the viscosities at low and high shear rates that conduct the coating colours behaviour and blade loading during coating operations. A fine tune of water retention helps preventing from bleeding or misting while improving solids stability and coating holdout.

Rheocoat™ 66 C helps keepy your process under control. Rheocoat™ 66 C is a synthetic rheology modifier allowing a better control of the coating process and an improved paper quality. Rheocoat™ 66 C is a ready to use acidic modifier. Rheocoat™ 66 C features outstanding water retention efficiency and conferes a balanced rheology profile to your coating color.

Rheocoat™ 66 SN is a synthetic rheology modifier allowing a better control of the coating process and helping to get improved paper and board qualities. Rheocoat™ 66 SN is a pre-neutralized emulsion, ready to use and easy to mix into the coating colors. Rheocoat™ 66 SN provides very good water retention with an optimal thickening effect

Rheocoat™ 73 is a synthetic rheology modifier allowing a better control of the coating process and an improved paper quality. Rheocoat™ 73 is a ready to use acidic emulsion of acrylic copolymer. Its composition and structure are designed to set the viscosities at low and high shear rates that conduct the coating colours behavior and blade loading during coating operations. A fine tune of water retention helps preventing from bleeding or misting while improving solids stability and coating holdout.

RHEOCOAT™ 82 is an associative thickener to better control the rheology of the coating color. RHEOCOAT™ 82 ready to use and to mix in the coating color, made with high standard of quality.

Rheocoat™ 93 helps to keep your process under control. Rheocoat™ 93 is a synthetic rheology modifier allowing a better control of the coating process and an improved paper and board qualities. Rheocoat™ 93 is a pre-neutralized emulsion, ready to use and easy to mix into the coating colors. Rheocoat™ 93 provides good water retention with an outstanding thickening effect.

Rheocoat™ is a family of Alkali Swellable Emulsions fitted for all types of coating colors and application devices. Rheocoat™ are robust and stable emulsions, easy to handle with low skinning and foaming tendency and a good resistance to shears. The Rheocoat™ family is VOC free. Produced according to the highest standards of quality, security and environmental aspects in an ISO certified Coatex plant on four continents. Rheocoat™ 93 AC helps to keep your process under control. Rheocoat™ 93 AC is a synthetic rheology modifier allowing a better control of the coating process and an improved paper and board qualities. Rheocoat™ 93 AC provides good water retention with an outstanding thickening effect.

Rheocoat™ 93 C helps to keep your process under control.Rheocoat™ 93 C is a synthetic rheology modifier allowing a better control of the coating process and an improved paper and board qualities. Rheocoat™ 93 C is a pre-neutralized emulsion, ready to use and easy to mix into the coating colors. Rheocoat™ 93 C provides good water retention with an outstanding thickening effect.

Rheocoat™ 93 NA helps to keep your process under control. Rheocoat™ 93 NA is a synthetic rheology modifier allowing a better control of the coating process and an improved paper and board qualities. Rheocoat™ 93 NA is a pre-neutralized emulsion, ready to use and easy to mix into the coating colors. Rheocoat™ 93 NA provides good water retention with an outstanding thickening effect.

Rheocoat™ is a family of Alkali Swellable Emulsions fitted for all types of coating colors and application devices. Rheocoat™ are robust and stable emulsions, easy to handle with low skinning and foaming tendency and a good resistance to shears. The Rheocoat™ family is VOC free. Produced according to the highest standards of quality, security and environmental aspects in an ISO certified Arkema plant on four continents. Rheocoat™ 94 helps to keep your process under control. Rheocoat™ 94 is a synthetic rheology modifier allowing a better control of the coating process and an improved paper and board qualities. Rheocoat™ 94 provides good water retention with an outstanding thickening effect.

Rheosolve™ D is a line of polymeric dispersants with proven anti-scaling efficiency for dishwashing, laundry detergents, hard surface cleaners. Rheosolve™ D products are available worldwide with local production facilities.

Rheosolve™ T is a line of rheology modifiers dedicated to controlling the rheological behavior of all types of liquid formulations for dishwashing, laundry detergents and hard surface cleaners. A wide spectrum of formulation challenges can be addressed: suspension of particles, sprayability, alkaline and acidic pH conditions, high surfactant and high electrolytes contents.

Rheosolve™ D 12AS is a versatile dispersing agent specifically designed for automatic dishwashing formulations. It improves shine by preventing spotting, filming and soil redeposition. Rheosolve™ D 12AS is a ready to use acid polymer in liquid form. It is available in granulated form as well under the name Rheosolve™ D 12AS.

Rheosolve™ D 12ASG is a versatile dispersing agent specifically designed for phosphate-free automatic dishwashing formulations. It improves shine by preventing spotting, filming and soil redeposition. Rheosolve™ D 12ASG is a ready to use acidic polymer in granulated form. It is available in liquid form as well under the name Rheosolve™ D 12AS.

Rheosolve™ D 15AS is a highly effective dispersing agent specifically designed for phosphate free automatic dishwashing formulations. It improves shine by preventing spotting, filming and soil redeposition. Rheosolve™ D 15AS is a ready to use acid polymer in liquid form. It is available in granulated form as well under the name Rheosolve™ D 15ASG.

Rheosolve™ D 15ASG is a highly effective dispersing agent specifically designed for phosphate-free automatic dishwashing formulations. It improves shine by preventing spotting, filming and soil redeposition. Rheosolve™ D 15ASG is a ready to use acidic polymer in granulated form. It is available in liquid form as well under the name Rheosolve™ D 15AS.

Rheosolve™ D 35S is an acrylic polymer with molecular weight optimized to provide excellent dispersion properties of inorganic scale in dishwashing and laundry care formulation for both household and I&I markets.

Rheosolve™ D 5AS is a dispersing agent for the household, industrial and institutional detergent industry. It prevents soil and mineral redeposition and presents good chlorine compatibility. Rheosolve™ D 5AS is a ready to use polyacrylic acid polymer.

Rheosolve™ D 5S is a dispersing agent for the household, industrial and institutional detergent industry. It prevents soil and mineral redeposition and presents good chlorine compatibility. Rheosolve™ D 5S is a ready to use polyacrylic acid, sodium neutralized in aqueous solution.

RHEOSOLVE™ D 5S PF is a dispersing agent for the household, industrial and institutional detergent industry. It prevents soil and mineral redeposition and presents good chlorine compatibility. RHEOSOLVE™ D 5S PF is a ready to use polyacrylic acid, sodium neutralized in aqueous solution. RHEOSOLVE™ D 5S PF is biocide free.

Rheosolve™ T 450 is polyurethane thickener in aqueous solution for the household, industrial and institutional detergent industry. It is solvent and Alkyl Phenol Ethoxylate (APE) free. It is specifically designed for all types of water based acidic formulations.

Rheosolve™ T 633 is an acrylic thickener in aqueous dispersion for the household, industrial and institutional detergent industry. It is specifically designed to thicken high pH formulations. Rheosolve™ T 633 is easy to use and provides instantaneous thickening effect.

Rheosolve™ T 635 is an acrylic thickener in aqueous dispersion for the household, industrial and institutional detergent industry. It is specifically designed for spray formulations to provide strong holding power on vertical surfaces. Rheosolve™ T 635 is easy to use and provides instantaneous thickening effect.

Rheosolve™ T 637 is an acrylic thickener in aqueous dispersion for the household, industrial and institutional detergent industry. It provides a versatile thickening efficiency. Rheosolve™ T 637 is easy to use and provides instantaneous thickening effect.

Rheosolve™ T 638 is a water based acrylic thickener formulation with no residual solvents which is low viscosity when supplied for an easier handling. Thanks to its associative nature when neutralized it provides superior thickening properties to various type of detergency formulations for Household and Institutional & Industrial industries.

Rheosolve™ T 650 is an acrylic thickener in aqueous dispersion for the household, industrial and institutional detergent industry. It is specifically designed to thicken formulations with high surfactant content and/or high electrolytes content. Rheosolve™ T 650 is easy to use and provides instantaneous thickening effect.

Rheosolve™ T 700S is a rheology modifier dedicated to thicken and suspend particles in all type of home care, household or industrial and institutional cleaning products. Rheosolve™ T 700S has an excellent ability to suspend particles in fluid formulations and provides smooth flow. It fosters the dispersion of all type of particles without the need of dispersant. Rheosolve™ T 700S is a liquid polymer, easy to use in cold process.

Rheosolve™ T 701S is a rheology modifier dedicated to thicken and suspend particles in all type of home care, household or industrial and institutional cleaning products. Rheosolve™ T 701S has an excellent ability to suspend particles in fluid formulations and provides smooth flow. It fosters the dispersion of all type of particles without the need of dispersant. Rheosolve™ T 701S is a liquid polymer, easy to use in cold process.

Rheosperse™ are specially designed to maximize the efficiency of your process. Our expertise is to disperse and stabilize all types of minerals in water phase at high concentrations. Rheology and Specialty Additives continues to develop tailor-made solutions for specific minerals suspensions requirements.

Designed for stability and compatibility, Rheosperse™ 144 A is an ideal choice for rutile titanium dioxide slurry producers. A robust solution designed with the specific behavior of TiO2 slurries in mind, it can be used to produce stable slurries on a wide variety of titanium dioxide coming from chloride or sulphate manufacturing processes and different surface treatments. Rheosperse™ 144 A also provides synergistic effects and proven compatibilities with paint formulations dispersed with similar hydrophilic copolymer technology. It provides stable slurries and therefore contibutes to reduce costs, supply chain confidence and improved flexibility of coating formulators.

Rheosperse™ 1507 is specially designed for aqueous dispersions of calcium silicate and allows the production of high-solids stable suspensions and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 1712 is specially designed forn bauxite. Rheosperse™ 1712 allows the production of high-solids stable suspensions and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 172 can be used as a dispersant and/or adjuvant in concentrate mineral suspensions, and Suspo-Emulsion formulations. Rheosperse™ 172 can be used to produce agricultural mineral suspensions with high solids contents, with low viscosities and excellent storage stability.

Designed to disperse hydroxide magnesium and/or oxide magnesium to achieve high solids content with excellent storage stability.

Rheosperse™ 3002 is specially designed for aqueous dispersion of clays: it can be used on a wide variety of clays coming from different deposits. Rheosperse™ 3002 provides high solids stable slurries and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 3010 is specially designed for aqueous dispersions of kaolin days, it can be used on a wide variety of kaolin clays coming from different deposits. Rheosperse™ 3010 provides high-solids stable slurries and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 3030 is specifially designed to provide kaolin clay slurries the low viscosity required for purification step. Rheosperse™ 3030 provides stable slurries and therefore contributes to reduce costs and to improve flexibility of formulations.

The product is specially designed for aqueous dispersions of kaolin clays, it can be used on a wide variety of kaolin clays coming from different deposits. The product provides high-solids stable slurries and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 3080 is specially designed for aqueous grinding process of calcined kaolin clays, it can be used on a wide variety of calcined kaolin clays from different deposits. Rheosperse™ 3080 provides high-solids stable slurries and therefore contributes to reduce production costs.

Rheosperse™ 3204 dispersant is especially suitable to produce stable and fluid slurries at medium to high solids content with a range in particle sizes from coarse to fine; it ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3206 can be used for wet grinding of CaCO3. Rheosperse™ 3206 especially designed for slurries production with coarse to medium particle size.

Rheosperse™ 3220 is specially designed for wet grinding CaCO3. Rheosperse™ 3220 dispersant is especially suitable to produce stable and fluid slurries of calcium carbonate at medium to high solids content for coarse particle sizes. it ensures to slurries a storage stability of 1 week minimum.

Rheosperse™ 3246 is specially designed for wet grinding CaCO3. Rheosperse™ 3246 is a fully neutralized grinding aid especially suitable to produce stable and fluid ground calcium carbonate slurries at medium to high solids content with a range in particle sizes from fine to ultra fine. It ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3248 is specially designed for wet grinding CaCO3. Rheosperse™ 3248 is an acidic grinding aid especially suitable to produce stable and fluid calcium carbonate slurries at medium to high solids content with a range in particle sizes from fine to ultra-fine. It ensures to slurries storage stability of 1 week minimum. In addition, it can be used in combination with alkali solutions such as NaOH.

Rheosperse™ 3266 is specially designed for wet grinding CaCO3. Rheosperse™ 3266 is a partially neutralized grinding aid especially suitable to produce stable and fluid calcium carbonate slurries at medium to high solids content with a range in particle sizes from fine to ultra-fine. It ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3280 is especially suitable to produce stable and fluid slurries at medium to high solid content for fine PCC. Rheosperse™ 3280 allows strong efficiency at low amount to maximize your cost in use.

Rheosperse™ 3288 is a grinding aid at pH 6, especially suitable to produce stable and fluid slurries at medium to high solids content with a range in particle sizes from coarse to fine. It ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3290 is a polycarboxylate especially developed for CaCO3 dry grinding process.

Rheosperse™ 3310 is specially designed for aqueous dispersions of various minerals, it can be used with a wide variety of minerals coming from different deposits. Rheosperse™ 3310 allows the production of high-solids stable suspensions and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 3345 is specially designed for aqueous dispersions of various minerals, it can be used with a wide variety of minerals coming from different deposits. Rheosperse™ 3345 allows the production of high-solids stable suspensions and therefore contributes to reduce costs and to improve flexibility of formulations.

Rheosperse™ 3350 dispersant is especially suitable to produce stable and fluid suspensions of fertilizers at medium to high solids content with a range of particles sizes from coarse to fine. It ensures the slurry storage stability of 1 week minimum.

Rheosperse™ 3360 is a cost effective solution for mineral dispersions at acidic pH. Very efficient at low amount to maximize suspension stability at high solids content.

Rheosperse™ 3370 can be used efficiently to disperse and stabilize specifics minerals such as oxyde minerals. Very efficient at low amount to maximize suspension stability at high solids content.

Rheosperse™ 3410 is a polyacrylate dispersant which is used to disperse inorganic materials in waterborne system. Its chemistry that uses an ionic repulsion mechanism to disperse minerals in water can be efficiently implemented in association with a non-ionic surfactant to produce talc slurry at high solids content.

Rheosperse™ 3450 has a very efficient dispersing effect on talc, it has a wetting effect. It reduces the use of surfactant with low level of use.

Rheosperse™ 3640 is dedicated for TiO2 wet grinding process at high solid content before mineral and/or organic surface coating. Less sensitive when TiO2 pH varies.

Rheosperse™ 3648 is especially designed to grind TiO2. Rheosperse™ 3648 is suitable to produce stable and fluid slurries at medium to high solids content with a range in particle sizes from fine to ultra fine; it ensures to slurries storage stability of 1 week minimum.

Rheosperse™ 3840 is a dispersant developed for dispersion process of sparingly soluble minerals in water. It provides low viscosity and good stability to high solid content Mg(OH)2 suspension.

Rheosperse™ 4050 improves dispersion of Calcium Hydroxide in water at high concentrations. Rheosperse™ 4050 is not affected by high salt concentrations and can be used in a wide range of alkaline pH.

Rheosperse™ 4050 D improves dispersion of Calcium Hydroxide in water at high concentrations. Rheosperse™ 4050 D is not affected by high salt concentrations and can be used in a wide range of alkaline pH.

Rheosperse™ 4060 is a high-performance aqueous dispersant designed for Calcium Hydroxide dispersion at high concentrations.

Rheosperse™ S 300 is a pseudo plastic thickener providing high yield value. It is an effective viscosity builder that prevents sedimentation.

Rheology Modifiers for next generation cleansing formulae. Today’s body and facial wash as well as shampoo bring more than cleansing, they must be visually attractive with color, transparency, particles, glitter… and provide beauty benefits. The creation of such formulations can be quite challenging. The Rheostyl™ line addresses these needs and offers great flexibility to formulators with easy-to-use acrylic waterborne emulsions.

Rheostyl™ 100 is a rheology modifier highly efficient to thicken and suspend particles in all type of surfactant and soap-based cleansing formulas. Rheostyl™ 100 provides elegant texture with smooth flow and high clarity from neutral pH to alkaline pH. Rheostyl™ 100 is a low viscosity aqueous liquid emulsion easily incorporated in any type of formulations.

Rheostyl™ 85 L is a rheology modifier specifically designed to provide excellent clarity, suspension and thickening to low pH cleansing products formulated with natural preservatives. Rheostyl™ 85 L is versatile and easy to formulate with a one step neutralization process and no need for the back-acid technique.

Rheostyl™ 90 N is a highly efficient thickener that produces unique crystal clear formulas. It thickens instantly after neutralization and produces attractive textures with smooth honey-like flow. Rheostyl™ 90 N is perfectly adapted for challenging surfactant systems such as sulfate-free. Rheostyl™ 90 N is a low viscosity aqueous liquid emulsion, easily incorporated in any type of formulations.

Inspired by the growing trend of “clean beauty” and minimalist formulations, Rheostyl™ E is a new line of polymeric emulsifiers combining the benefits of traditional emulsifiers & polymers:
·       Powerful emulsification, smooth texture and unique sensorial
·       Flexibility of formulation, easy process and water resistance

Rheostyl™ E polymers will simplify your formulation and provide with one INCI name 6 functionalities:
·       EMULSIFICATION without the need for co-emulsifiers
·       TEXTURE from mist to bouncy cream
·       SUSPENSION of oil and mineral UV filters
·       DISPERSION: Outstanding compatibility with mineral UV filters
·       SPREADING: Even coverage of the skin thanks to fine dispersion of UV filters
·       WATER RESISTANCE combined with nude skin afterfeel.

Rheostyl™ E-Cream is a polymeric emulsifier associating the benefits of traditional emulsifiers with the benefits of polymers. - Powerful emulsification, smooth texture and unique sensorial signature. - Versatily, easy process and water resistance. Rheostyl™ E-Cream is a dedicated to formulate thin to thick emulsions with a creamy and cushion feel. It offers and excellent electrolytes resistance.

Rheostyl™ Savon is a rheology modifier dedicated to thicken and stabilize mild soap based pasty washes with low dosage of fatty acid and neutralizer. It provides a smooth and pasty texture easy to spread on the skin. Rheostyl™ Savon is a liquid polymer allowing fast and easy process.

Rheostyl™ UP is a rheology modifier dedicated to skin care, sun care and color cosmetics applications. It is a highly efficient suspending agent to stabilize oil in water emulsions and suspend mineral particles, pigments or capsules in fluid formulations. Rheostyl™ UP is a low viscosity aqueous liquid polymer easily incorporated in cold process formulations.

A full range of HASE (Hydrophobically modified Alkali Swellable Emulsions) type rheology modifiers with advantages during:
·       Formulation: ease of use, high efficiency,
·       Storage: in-can appearance, syneresis control,
·       Application: optimum results with tinting systems, improved feel of application, spatter resistance, film build, body and texture.
Furthermore, they offer an excellent alternative to HEC thickeners.

Rheotech™ 102 BR is a liquid premium rheology modifier designed to provide maximum high-shear viscosity for improved film build. Rheotech™ 102 BR is used in interior and exterior waterborne coating formulations.Rheotech™ 102 BR suits for low VOC formulations when the use of solvents for viscosity suppression is limited.Rheotech™ 102 BR develops association with other formulation components; it is used to provide enhanced viscosity and stability in medium and high PVC paints.

Rheotech™ 117 is a liquid premium rheology modifier designed to provide maximum high-shear viscosity for improved film build. Rheotech™ 117 is used in interior and exterior waterborne coatings formulation.

Rheotech™ 146 is a non associative thickener designed for use in adhesives, paints, sealants and mastics.

Rheotech™ 1800 is an associative thickener providing a Newtonian rheology profile.Compared to similar HASE type thickeners, Rheotech™ 1800 shows a unique visco-elastic balance, with a smooth transition towards flow as more shear is applied. It provides to the paints a liquid to creamy appearance while showing outstanding flow ability.Belonging to a high performing product line, Rheotech™ 1800 meets most advanced requirements: efficiency, optimized rheology profile, ease of use, pigment compatibility, versatility, water resistance. Rheotech™ 1800 offers advantages when surfactants and/or electrolytes are already present or incorporated to the formulation and also contributes to limit viscosity drop at tinting and to stabilize colored formulations at storage.

Rheotech™ 2000 is an acrylic associative thickener for water-based systems (also called HASE). It imparts a newtonian behaviour and is highly effective in silk and flat emulsion paints. It provides an excellent balance between high and low shear viscosities and an excellent compatibility with most organic and inorganic pigments

Rheotech™ 2800 is an associative acrylic thickener providing a newtonian to balanced rheology profile. Rheotech™ 2800 is part of the Rheotech™ x800 new thickener range

Rheotech™ 3300 is an hydrophobically modified alkali swellable acrylic based associative thickener. Compared with Rheotech™ 2000, it provides more in–can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. Rheotech™ 3300 therefore improves brush load and film build, spattering and sag-levelling compromise. Rheotech™ 3300 is an ethoxylated nonylphenols-free alternative to Rheotech™ 3000.

Rheotech™ 3500 is highly recommendable for the rheology adjustment of semi-gloss and matt dispersion paints. It provides an improved rheological behaviour to semi-gloss and matt dispersion paints. Thanks to its associative character, It is also highly effective at medium and high shear rates. In particular, it is the ideal tool in order tomatch a given Stormer viscosity (medium shear viscosity). Therefore, compared to cellulosic ethers, it provides both better in-can appearance and coating properties: the better control of the medium shear viscosity allows to reinforce the in-can consistency, thus the perceived quality of the paint. It can be used in combination with other thickeners, either those effective at low shear rates (e.g cellulosic ethers and acrylic thickeners such as Viscoatex™ 730 or Thixol™ 53 L), or those providing a Newtonian rheology (e.g polyurethane thickeners such as Coapur™ 3025).

Rheotech™ 3800 is an acrylic associative thickener for water-based systems (also called HASE). It is designed to improve both the rheology and the color acceptance of water-based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by brush, especially for finishing touches.

Rheotech™ 3900 is an associative acrylic thickener designed to improve both the rheology and the color acceptance of water based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by bush, especially for finishing touches. Rheotech™ 3900 ensures safe additions of colorants in water based formulations, limiting viscosity changes and rub-out issues. Rheotech™ 3900 can be used in every kind of alkaline water based formulation and particulary in solvent and Alkyl Phenol Ethoxylate (APE) free formulations.

Rheotech™ 3925 is an associative acrylic thickener designed to improve both the rheology and the color acceptance of water based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by bush, especially for finishing touches. Rheotech™ 3925 ensures safe additions of colorants in water based formulations, limiting viscosity changes and rub-out issues. Rheotech™ 3925 can be used in every kind of alkaline water based formulation and particulary in solvent and Alkyl Phenol Ethoxylate (APE) free formulations.

Rheotech™ 4000 LC is a low carbon footprint HASE thickener designed to improve both the rheology and the color acceptance of water-based formulations. Rheotech™ 4000 LC exhibits a carbon footprint reduction of more than 15% compared to standard HASE thickeners with no compromise on performance. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by bush, especially for finishing touches. Rheotech™ 4000 LC ensures safe additions of colorants in water-based formulations, limiting viscosity changes and rub-out issues. Rheotech™ 4000 LC can be used in every kind of alkaline water based formulations and particulary in solvent and Alkyl Phenol Ethoxylate (APE) free systems.

Rheotech™ 4000 MB is the Mass Balance version of the Rheotech™ 4000 LC with a Bio-attributed content of 60%. It allows a significant reduction of the product carbon footprint compared to its fossil version. Rheotech™ 4000 MB achieves exactly the same performance as the Rheotech™ 4000 LC and can be readily used and implemented as a direct drop-in.

Rheotech™ 4200 is an associative acrylic thickener designed to improve both the rheology and the color acceptance of water based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by bush, especially for finishing touches. Rheotech™ 4200 ensures safe additions of colorants in water based formulations, limiting viscosity changes and rub-out issues. Rheotech™ 4200 can be used in every kind of alkaline water based formulation and particulary in solvent and Alkyl Phenol Ethoxylate (APE) free formulations.

Rheotech™ 4600 is an associative acrylic thickener designed to improve both the rheology and the color acceptance of water based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by brush, especially for finishing touches. Rheotech™ 4600 can be used in every kind of alkaline water based formulation and particulary in solvent and Alkyl Phenol Ethoxylate (APE) free formulations.

Rheotech™ 4800 is an associative acrylic thickener providing a pseudoplastic rheology profile. Rheotech™ 4800 provides your formulations high values viscosities at low shear together with a valuable apperance. Rheotech™ 4800 is part of the Rheotech™ x800 new thickener range

Rheotech™ 4925 is an acrylic associative thickener for water-based systems (also called HASE). It provides a pseudoplastic rheology profile and therefore enhance viscosities at low shear rates together with a valuable appearence. It is particularly efficient in systems with a very low binder content exhibits an outstanding behaviour towards coloring.

Rheotech™ M 02 is a highly effective associative acrylic based thickener specifically designed for putty and textured coatings formulations. Rheotech™ M 02 provides high viscosities at low and medium shear rates and outstanding resistance to crushing.

Rheotech™ M 03 is a highly effective associtive acrylic thickener especially designed for water-based putties and textured coating formulations. Rheotech™ M 03 provides high viscosities at low and medium shear rate thinning behaviour. It is therefore giving a good body and high build to formulations while echibiting ease of application.

Rheotech™ M 326 is a highly effective associative acrylic thickener especially designed for water-based putties and textured coating formulations. Rheotech™ M 326 provides high viscosities at low and medium shear rate with a good shear thinning behaviour. It is therefore giving a good body and high build to formulations while exhibiting ease of application.